HOMETECH☰
Silicone resin Coated Fiberglass Sleeving is engineered with a silicone resin coating over an insulating fiberglass sleeve.
It is good at dielectric, self-extinguishing and softness. It is widely used in H & N class automobile, shipbuilding, motor, household appliance, electric heater equipment, special lamp and other insulation protection.
The self-extinguishing time of Silicone resin Coated Fiberglass Sleeving is 30 seconds.
| Inner diameter | Thickness | |||
| Diameter | Tolerance | 4000V | 7000V | C,D grade |
| 0.5－2.0mm | +0.20－0.00mm | 0.40±0.05mm | 0.45±0.05mm | 0.35±0.05mm |
| 2.5－3.0mm | +0.25－0.00mm | 0.40±0.05mm | 0.50±0.05mm | 0.35±0.05mm |
| 3.5－5.0mm | +0.35－0.00mm | 0.50±0.05mm | 0.55±0.05mm | 0.42±0.05mm |
| 6.0－9.0mm | +0.50－0.00mm | 0.55±0.05mm | 0.60±0.05mm | 0.45±0.05mm |
| 10.0-12.0mm | +0.70－0.00mm | 0.60±0.05mm | 0.65±0.05mm | 0.53±0.05mmm |
| 13.0-20.0mm | +0.80－0.00mm | 0.65±0.05mm | 0.70±0.05mm | 0.56±0.05mm |
| 22.0-35.0mm | +0.90－0.00mm | 1.00±0.05mm | 1.05±0.05mm | 0.70±0.05mm |
| Item | Performance |
| Continuous use temperature range | -10℃+200℃ |
| Temperature resistance | 265℃±2℃168＞1/2 original voltage value |
| Heat aging property | 260℃、6H、No cracks |
| Cold bending | No cracks |
| Horizontal combustion | less than 30S |
| combustion(VW-1) | less than 30S |
| Hydrolytic stability | Not sticky, no distortion, no softening |
Photos
Customers who bought this product also bought