1. Suitable for copper, aluminum, plastic, wood cutting, manual feeding, automatic pressing, automatic cutting, automatic spray cooling of saw blade, the cutting speed is adjustable.
2. The design of horizontal movement of blade will avoids the overload and swinging of cutting blade which will affect the cutting verticality. Multiple pieces can be cut at the same time, square and round tubes, no need of fixtures, and special shapes also can be cut.
3. The pressing method adopts the gantry type design, and the pressing is stable and reliable.
4. Japan NTN bearings, the runout values of the main shaft radial and axial are both less than 0.01mm, the thickness of the iron plate of the machine is 20-25mm, and the whole machine is all-metal joints. The joints of the machine are not easy to age after years of use, durable and air-proof in the complex processing environments.
5. The pressing system and the feeding system are separated from each other and do not affect each other.
6. The discharge rack adopts a double-sided guide rail structure, with smooth sliding and stable positioning.
7. Integrated waste box, the waste does not fly around when cutting.
8. The control circuit is equipped with a sequence phase protector to prevent safety accidents from reversing the cutting blade.
9. Automatic spray cooling system: The special cutting fluid for copper and aluminum is used for spray cooling, the surface of the product is bright and clean, and the cutting fluid can be recycled.
10. With lighting fixtures: Observe the product without worrying about insufficient light.
|Tolerance of cutting length(mm)||±0.15||±0.15||±0.15||±0.15||±0.2||±0.2|
|Vertical tolerance of cutting||±0.3°mm||±0.3°mm||±0.3°mm||±0.3°mm||±0.3°mm||±0.3°mm|
|Mode of control||PLC semi automatic，feeding manually||PLC semi automatic，feeding manually||PLC semi automatic，feeding manually||PLC semi automatic，feeding manually||PLC semi automatic，feeding manually||PLC semi automatic，feeding manually|
|Mode of cutting blade||automatic||automatic||automaticPneumatic to hydraulic||automaticPure hydraulic (with hydraulic station)||automatic||automatic|
|Power supply||380V 50HZ||380V 50HZ||380V 50HZ||380V 50HZ||380V 50HZ||380V 50HZ|
|Applicable||with waste collection box,Mainly for cutting small materials, thin materials||with waste collection box,The saw shaft and feed shaft is larger, suitable for cutting solid material, thick material.The recommended diameter of solid bar is less than 60mm||Mainly used for cutting thin profiles, is more economical||It can cut bars with a diameter of about 100mm, and the blade feeding is more powerful||None||None|