Polishing Machine Disc type | 1000MM Diameter 4 Heads

Introductiontype

Four-head disc type Polishing Machine is suitable for polishing, sanding and drawing various hardware accessories, such as cylinders, cones, pen caps, pen holders, lipstick caps, thermos cup covers, watch cases, etc. It can be customized according to customer needs by replacing the mold.

Characteristic

1. The working disc of this machine can revolve intermittently, the workpiece fixture can rotate automatically, and the polishing head can be adjusted up and down and front and back to achieve the desired polishing effect of the product. The polishing time is 2-10 seconds per unit depending on the product.
2. This machine can be equipped with an automatic liquid waxing device (good Economic effect) and the waxing time can be adjusted according to the product effect.
3. This machine uses a mechanical spring chuck, which is easy to install, quick to clamp, and has a low maintenance rate. The whole machine uses a circuit control system to replace functions that cannot be achieved by humans, greatly saving costs and improving production efficiency.
4. The Polishing Wheel flexibly contacts the product for polishing, and the equipment has the functions of automatic compensation for polishing wheel loss and automatic swing of the machine head.
5. When the disc stops rotating, the product is manually picked up and placed, and so on.
6. Equipped with a dust suction port, it can be directly connected to the dust suction device.

Technical Parameters

Note: The above parameters may be partially changed during the specific design!