HOMETECH☰
MACHINES --- Cut Tubes --- Copper And Aluminum Tube Cutting Machine --- Automatic Copper And Aluminum Tube Cutting Machine1. Suitable for copper, aluminum, plastic and wood cutting, automatic feeding, automatic pressing, automatic cutting, automatic spray cooling of blade, the cutting speed is adjustable.
2. The design of horizontal movement of blade will avoids the overload and swinging of cutting blade which will affect the cutting verticality. Multiple pieces can be cut at the same time, square and round tubes, no need of fixtures, and special shapes also can be cut.
3. The pressing method adopts the gantry type design, and the pressing is stable and reliable.
4. Japan NTN bearings, the runout values of the main shaft radial and axial are both less than 0.01mm, the thickness of the iron plate of the machine is 20-25mm, and the whole machine is all-metal joints. The joints of the machine are not easy to age after years of use, durable and air-tight in various complex processing environments
5. The pressing system and the feeding system are separated from each other and do not affect each other.
6. Equipped with automatic anti-scratch device of material.
7. The control circuit is equipped with a sequence phase protector to prevent safety accidents from reversing the saw blade.
8. Automatic spray cooling system: The special cutting fluid for copper and aluminum is used for spray cooling, the surface of the product is bright and clean, and the cutting fluid can be recycled.
Horizontal cutting means that when the equipment is cutting, the blade is cut directly from the back to the front. This type of cutting is slightly more expensive than other types of cutting, but its advantages are: When cutting products, the load on the blade is uniform, and the swing of the blade is consistent, so that the surface of the product is relatively flat and smooth, and the cutting capacity is also wider. Therefore, the fully automatic aluminum cutting machine with horizontal cutting not only improved the processing quality and efficiency, also reduced the cost of secondary processing, prolong the service life of the blade and reduce the cost of blade consumables.
| Model | QG06-230Q | QG06-230SK | QG06-310Q | QG06-310SK |
| Cutting height(mm) | 93 | 93 | 140 | 140 |
| Cutting width(mm) | 230 | 230 | 310 | 310 |
| Cutting length(mm) | 10~300（More than 300mm can be fed multiple times） | 10~300（More than 300mm can be fed multiple times） | 10~300（More than 300mm can be fed multiple times） | 10~300（More than 300mm can be fed multiple times） |
| Tolerance of cutting length(mm) | ±0.1 | ±0.1 | ±0.15 | ±0.15 |
| Vertical tolerance of cutting | ±0.3°mm | ±0.3°mm | ±0.3°mm | ±0.3°mm |
| Speed(M/min) | 3.5 | 3.5 | 3.5 | 3.5 |
| Power(KW) | 3 | 3 | 4 | 4 |
| Mode of control | Pneumatic feeding system， It is suitable for changing the cutting length infrequently, the size is adjusted by shaking, and the cutting length is displayed directly on the screen. | CNC fully automatic, servo feeding system , input cutting length on the touch screen, suitable for many kinds of cutting specifications, need to adjust the length frequently. | Pneumatic feeding system, It is suitable for changing the cutting length infrequently, the size is adjusted by shaking, and the cutting length is displayed directly on the screen. | CNC fully automatic, servo feeding system , input cutting length on the touch screen, suitable for many kinds of cutting specifications, need to adjust the length frequently. |
| Capacity | 40000~170000/8h | 40000~170000/8h | 40000~170000/8h | 40000~170000/8h |
| None | None | None | None | None |
| Feeding rack | 3m | 3m | 3m | 3m |
| Mode of cutting blade | automatic | automatic | automatic | automatic |
| Power supply | 380V 50HZ | 380V 50HZ | 380V 50HZ | 380V 50HZ |
| Air supply | 4-6kgs/cm2 | 4-6kgs/cm2 | 4-6kgs/cm2 | 4-6kgs/cm2 |
| Dimension(mm) | 1400*1350*1400 | 1500*1450*1730 | 1500*1350*1400 | 1570*1600*1670 |
| Weight(KGS) | 600 | 600 | 700 | 1000 |
Photos
Video
Customers who bought this product also bought